Sign In with your
Trend Micro Account
Need Help?
Need More Help?

Create a technical support case if you need further support.

Upgrading the DELL iDRAC firmware to fix vulnerabilities in Deep Discovery products

    • Updated:
    • 1 Apr 2018
    • Product/Version:
    • Deep Discovery Analyzer 6.0
    • Deep Discovery Email Inspector 3.0
    • Deep Discovery Inspector 5.0
    • Platform:
    • Linux All
Summary

Deep Discovery Inspector (DDI),Deep Discovery Email Inspector (DDEI) and Deep DIscovery Analyzer (DDAN) all use DELL hardware.

As an Administrator, you can upgrade DELL iDRAC firmware to version 2.52.52.52 to fix following vulnerabilities:

  • CVE-2018-1207
  • CVE-2018-1208
  • CVE-2018-1209
  • CVE-2018-1210
  • CVE-2018-1211
Details
Public

To upgrade DELL iDRAC firmware to version 2.52.52.52:

  1. Log on to the destination server's (DDI, DDEI or DDAN server) iDRAC console.

    • Enter https://<iDRAC_IP>.
    • The default username and password is root / calvin.
  2. Go to Overview > Server > Properties > Summary and check the firmware version. If the version is older than 2.52.52.52, refer to the following steps to upgrade the firmware:

    Click image to enlarge

    1. Download DELL iDRAC firmware from Dell's Product Support page: IDRAC with Lifecycle Controller V.,2.52.52.52.

      Look for the filename iDRAC-with-Lifecycle-Controller_Firmware_74GHJ_WN64_2.52.52.52_A00.EXE.

    2. Go to the iDRAC console, Overview > iDRAC Settings > Update and Rollback > Update.
    3. Upload the downloaded file (iDRAC-with-Lifecycle-Controller_Firmware_74GHJ_WN64_2.52.52.52_A00.EXE) in step 1 and install it.
    4. After the upgrade is completed, log on to the iDRAC web console and go to Overview > Server > Properties > Summary to check the firmware version. It should now be 2.52.52.52.

    If you do not want to upgrade the firmware but still want to use iDRAC, as a workaround, you can set iDRAC to only allow a dedicated IP to access it. Do the following:

    1. Open iDRAC console.
    2. Go to Overview > iDRAC Settings > Network.
    3. Click Advanced Settings.
    4. On the Network Security page, select IP Range Enable and set the IP info which will allow access to iDRAC.
    5. To apply the settings, click Apply.
Premium
Internal
Rating:
Category:
Configure
Solution Id:
1119600
Feedback
Did this article help you?

Thank you for your feedback!

To help us improve the quality of this article, please leave your email here so we can clarify further your feedback, if neccessary:
We will not send you spam or share your email address.

*This form is automated system. General questions, technical, sales, and product-related issues submitted through this form will not be answered.

If you need additional help, you may try to contact the support team. Contact Support

To help us improve the quality of this article, please leave your email here so we can clarify further your feedback, if neccessary:
We will not send you spam or share your email address.

*This form is automated system. General questions, technical, sales, and product-related issues submitted through this form will not be answered.