^{Click the image to enlarge.}

^{Click the image to enlarge.}

The file should look like this after downloading successfully:

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

^{Click the image to enlarge.}

1. Click the Download Virtual Appliance button.
2. Select Microsoft Hyper-V.
3. Tick the I agree to the End User License Agreement option.
4. Click Download Disk Image to the File.

^{Click the image to enlarge.}

• Login: admin
• Password (Default): V1SG@2021

1. configure network primary ipv4.static <interface name> <IP address in cidr format> <gateway> <dns>
   Example: configure network primary ipv4.static 123.456.789.111/24 123.123.123.123 222.222.222.222

   

   ^{Click the image to enlarge.}

2. configure endpoint  <Name of Service Gateway>.
3. After configuring the network, type "connect" to verify if it can reach out to Trend Micro Vision One Cloud Servers.

   

   ^{Click the image to enlarge.}

4. Copy the registration Token and proceed and paste it to putty to register the Service Gateway.

   

   ^{Click the image to enlarge.}

5. Open Putty on a machine that is on the same network as the Service Gateway, and perform SSH Shell to register Service Gateway to Trend Micro Vision One Console. Login using the updated credentials > type "enable" > Type "register <Registration Token>".

   

   ^{Click the image to enlarge.}

6. To verify, go back to Trend Vison One Console and check the status of Service Gateway.

   

   ^{Click the image to enlarge.}