From the SMS Client
Go to Devices → "expand the device" → Events → Performance → Tier Statistics
From the TPS CLI
Run the command "show np tier-stats." This command will provide information on the device's different tiers. Look at the "Tier 1:" statistics. The numbers in parentheses represent the high watermark on the device since its last reboot. The number on the left indicates the throughput when the command was issued.
# show np tier-stats
----------------------------------------------------------
Tier 1:
----------------------------------------------------------
Rx Mbps = 0.0 (0.0)
Tx Mbps = 0.0 (0.0)
Rx packets/sec = 0.0 (16.0)
Tx packets/sec = 0.0 (16.0)
Bypass Mbps = 0.0 (0.0)
VLANTrans packets/sec = 0.0 (0.0)
VLANTrans to Rx /sec = 0.0%
A/B Balance = 100.0% (A: 9.0 B: 7.0)
Utilization = 0.0% (0.0%)
Ratio to next tier = 100.0% [100.0%]
----------------------------------------------------------
| Rx Mbps | Rate in Mbits/second received by the device across all ports. |
| Tx Mbps | Rate in Mbits/second transmitted by the device across all ports. |
| Rx packets/sec | Rate in packets/second received by the device across all ports. |
| Tx packets/sec | Rate in packets/second transmitted by the device across all ports. |
| Bypass Mbps | Mbps matching inspection bypass rule, not counted against IPS total limit. |
| A/B Balance | Shows how Zuma is balancing between XLRs (50/50 is ideal). |
| Utilization | % as rated against system throughput. |
| Ratio to next tier | Only inspection bypass can bring this below 100%. |